Suspension setup for the Alfa 4C
First you need to set up the car on a perfectly level floor, in this case we are using tables to level the car. It is extremely difficult to find a floor that is made level as near
Replacing The Front Top Mount & Broken Spring On An Alfa MiTo.
Undo the front wheel bolts and remove the wheel. Detach the top of the drop link from the shock absorber with a 17mm spanner & 16mm socket. Release the brake hose and ABS wire.
Replacing the rear spring pan on a GTV/Spider.
Undo the wheel bolts & remove the wheel. It helps to spray rusty bolts with penetrating oil. Undo the 22mm hub nut and remove the bolt that holds the spring pan and dog leg. Pr
Replacing the rear dog leg on a GTV/Spider.
Undo the wheel bolts & remove the wheel. It helps to spray rusty bolts with penetrating oil. Undo the 22mm hub nut that holds the spring pan and dog leg. Undo the lower shock 1
Removing The Front Drop Link On A MiTo, Giulietta Or 500L
Remove the front wheel. On the early models undo the top bolt connected to the shock absorber bracket using a 17mm spanner to hold the ball joint while removing the nut with a 16mm
Removing The Upper Wishbone On A 159/BRERA
Remove the front wheel nuts and wheel. Undo the nut to the ball joint. Give the pillar an assuring tap with the magic hammer to loosen any corrosion, and pull the ball joint out. U
Replacing The Front Lower Wishbone On An Alfa 159/Brera/Spider
Undo the wheel studs to the right hand front wheel and remove the wheel. To remove the undertray undo all the 6mm allen bolts and T30, Phillips screws. Undo the 21mm nut (or 18mm 5
Replacing The Rear Shock Absorber On An Alfa 159 Sportwagon
Pull the rear seat release and fold the seat forward. Undo the 10mm screw to the front cover…. ….and pull forward. Pull back the wheel arch side cover. Looking down you
Replacing The Ball Joint On An Alfa 4C Front Lower Wishbone
Remove the ball joint securing spring clip. Press out the old ball joint. Push the new ball joint into position by hand…. …then press it firmly home. Don’t forget
Replacing The Ball Joint On An Alfa 4C Front Upper Wishbone
Release the securing spring clip over the boot. You will need a press to press out the old ball joint. The securing spring at the base of the boot will need removing. Slide the boo
