How To… remove the rear shocks on an Alfa SZ/RZ
Make sure the hydraulics lift button on the drivers console is in the ‘low’ position, then elevate the car. Open the rear boot, remove the spare wheel (I know it’
Spring pan bush replacement
First make sure you have the correct bushes and you know where they go, the bushes are different at either end of the spring pan Press out the existing worn bushes When the bushes
Alfa Romeo lower ball joint replacement on 105 series cars
Remove wheel using a decent length bar, it makes it a lot easier Undo lower ball joint Split lower ball joint using a propitiatory ball joint splitter and then lift the ball joint
Replacing the front wishbone on a Giulietta
Jack car up safely and support using axle stands, then remove road wheel. Remove the under tray, we have a handy nut gun for this! Take out wheel arch liner. Remove chassis strengt
Replacing a roll bar link on a 156, 147 or a GT
While the vehicle is on the ground loosen the road wheel nuts but do not remove. Jack both sides of the car up and make safe using axle stands, then remove the road wheel. Now this
Replacing a lower front wishbone on an Alfa 156/147/GT
A good starting point once the vehicle is jacked up safely, is to take off the under tray and remove the front wheel. Undo the 17mm nut holding the drop link to the fork leg. Undo
Changing the front lower wishbone on a 4C
Jack up car carefully and remove front road wheel, it is essential that you jack up the car using the correct jacking points to avoid damaging the chassis, this is more relevant fo
How to replace the rear wishbone on the Alfa 4C
Remove the rear diffuser and undertray Using a ball joint splitter carefully separate the outer ball joint from the upright. If you intend to refit the existing part make sure you
Fitting Front Suspension Blocks To The Alfa 4C
Undo the bolts to the front right side wheel then remove the wheel. Undo top shock absorber bolt and remove it, pulling the top of the shock absorber out so it misses the chassis.
