0

Giulietta
Selected model: Giulietta (Deselect)
Replacing The Bonnet Release Handle Support On An Alfa 159/Brera

Replacing The Bonnet Release Handle Support On An Alfa 159/Brera

These guides serve as an introduction into various Alfa maintenance tasks, and are designed to give Alfa owners a better understanding of the work that is involved. These are not full Alfa Romeo workshop manuals, where you will find the official techniques, technical specs and important safety considerations, which we would recommend you study before attempting any of these tasks.

This is the before and after shot of the bonnet release handle support.

The release handle….hanging.

There are x2 8mm bolts used to hold the bracket in place.

We are going to show you how to release the bonnet cable from the work bench but you will have to do this in situ. Press in the side locking tabs on the plastic nozzle…..

….and pull BACK from the locating hole.

Route the cable out of it’s guide then pop out the nipple.

You can just pull off the old handle and push it on the new bracket. Now replace the new bracket.

Share Post:

Call Us: 01763 244441

Get in touch with our friendly, experienced team today. For parts enquiries, email parts@alfaworkshop.co.uk. For service enquiries, email service@alfaworkshop.co.uk. For wholesale enquiries, email wholesale@ricambiwholesale.co.uk.