How to change a GTV/Spider/145/146/155 wheel bearing
Remove road wheel, remember that you need to make sure the vehicle is securly supported and if you haven’t got a nut gun you will need to loosen the wheel nuts on the floor R
Alfa romeo Giulia rear brake pads and disk replacement
Remove road wheel, be careful as the nearside of the car may have wheelnuts that undo clockwise on early cars. Then using the correct size pin punch remove thapad retaining pins, m
Replacing front brake pads and disks on a Giulia
Remove wheel, on early cars with brass wheel nuts the left hand side of the car will have wheel nuts that undo clockwise! Using a suitable punch remove caliper pins, catching the a
Replacing the handbrake cables on an Alfa Romeo 147, GT or 156
Put hand brake on and undo the button that closes the gaiter and then loosen the handbrake securing bolt. Undo clip under petrol tank. Pull handbrake cable out of retaining clip in
Replacing The Front Wheel Bearing On An Alfa Romeo Giulietta
First job is to get the car safely jacked up off the ground and remove the road wheel, then undo the brake caliper retaining bolts and slide the whole caliper off the disc. Undo th
Changing the wheel bearing on an Alfa Romeo 159 or Brera.
First things first, loosen the wheel nuts and then get the car off the ground and make sure that it is supported safely on axle stands, then remove the road wheels. Undo the callip
How to replace Alfa Romeo MiTo front brake pads & discs
1. First job is to loosen all the wheel nuts while the vehicle is on the ground, DON’T remove them yet. Next you need to jack the MiTo up and support it safely on axle stands
Replacing a GTV/Spider/145/146 Twin Spark front wheel bearing
Remove the front wheel and punch out the hub nut locking tabs on both sides. Undo the hub nut. Undo the bolt holding the ABS sensor and remove the sensor (be careful as the ABS sen
Replacing The Power Steering Reservoir On A 159 or Brera.
Undo the x3 13mm nuts securing the power steering reservoir. Unclip the x2 crimp clips. When you pull the hoses off the tank will leak oil…. ….so if you’re quick
Replacing A Split Inner CV Boot On A GTV/Spider 3.0/3.2
Remove the front wheel… …then the wheel arch side cover. To prevent the drive shaft turning whilst undoing the CV joint put a screw driver through the brake caliper int
