Replacing The Spark Plugs On A MiTo & Giulietta 1.4 Mulitiair Turbo.
Pull the engine cover up and off which is secured by three push fit bungs. Undo the 10mm breather rail bolt. Undo the four 10mm coil pack bolts. Unclip the breather pipe at the lef
Removing The Spark Plugs, Air Filter & Coil Pack On A MiTo 1.4 16 Valve.
If you just want to change the air filter and do the plugs another time then undo the three 7mm bolts to the front of the plastic housing. Release the bung connected to the inlet p
Removing A Spark Plug From A Stelvio/Giulia 2.0 (280hp)
Pop out the x2 front bolt covers on the engine cover… ….and undo the x2 10mm bolts. Unscrew the oil filler cap. There’s x2 push type fittings underneath at the ba
Removing The Back Up Key From Inside The Key Fob For A Stelvio Or Giulia
If you have a ring fob attached with dangly things like your supermarket Club Card, photo of your beloved…pet, keys and fluffy items that have no other use but to basically j
Removing The Coil Pack, Spark Plug & Air Filter On A MiTo 0.9 Turbo
Undo the x2 10mm bolts to the engine cover. Unclip the turbo intake hose. Pull the cover forward to release the rear bung then up and backwards. Undo the x6 7mm screws underneath t
Removing The Battery And Battery Tray From An Alfa 159/Brera
Disconnect the negative terminal to the battery. Push in the x2 retaining clips to remove the cover from the branch control unit. Undo the 10mm bolt to the positive terminal and th
Fitting An AlfaWorks Bespoke Stage 2 tuned ECU To A 4C
Take off the engine cover. Hold down the ratchet clamp securing clip on the top right of the ECU. Pull the clamp all the way back. Unplug the loom connector then release the left h
4C Stage 2 Tune ECU Immobiliser Coding
Step 1: Fit CAN Logger 2000 to OBD port of target vehicle with ignition off. Turn on ignition for 5 seconds (do not start the engine)to ensure immobiliser data has been captured. T
Removing The Alternator From An Alfa 159 1.9 JTDM
Undo the locking wheel nut and 17mm wheel bolts, then remove the wheel. Unscrew the x2 T30 screws to wheel arch side cover and the x1 Phillips screw underneath. Undo the lower E18
Removing The Spark Plugs From A Giulia/Stelvio 2.9 Quadrifoglio
Unclip the air box outlet pipes on both sides. Disconnect the two breather hoses on both sides. Separate the two rubber concertinas to the air housing box. Remove the plastic engin
