Unscrew the x4 Phillip screws along the bottom of the door card….
…and the baby screw on the side of the door.
Remove the x2 5mm allen bolts on the pull to handle.
Pop off the small cover behind the door release lever…
…and undo the 5mm allen bolt.
Pull off the corner ornament…
…and undo the screw.
Pull off the door card.
Release the cable support clips.
Disconnect the LED light wire.
Pop the door release wire and unhook it from the handle.
Push in the grey tab and flip up the red release lever to unplug the window switch.
Unplug the sensor.
Slide out the puddle light, disconnect the wire then the door card is free.