These are the tools you will require to complete this task
Remove top cover of engine
The oil filter housing is circled in red in this picture
Undo filter housing using a 27mm socket ratchet and long extension
Remove filter and seal from housing off the vehicle in a clean environment
Fit new seal and clip in new oil filter and refit using the reverse of the above procedure
To change the oil first take off the oil filler cap and put it on the front panel so you cant close the bonnet without putting it back on the car, then remove the undertray
Undo the sump plug
Drain the oil into a suitable container and dispose of carefully
Replace sump plug washer
